F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller
F4 1S AIO Brushless Flight Controller

F4 1S AIO Brushless Flight Controller

$44.99 USD Save $-5.00 USD
-426 in stock
F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad! 
F4 1S AIO FC(No Rx) integrates 3 components as F411 FC, 5A ESC and 25mW VTX. It supports external receivers like TBS Crossfire, Frsky XM+, and Spectrum DSMX etc. Meanwhile, this version can handle the 2S power system. 

Bullet Point

  • Integrated with a 25mW VTX, this AIO board(Frsky/Futaba Rx) is ultralight only 3.92g, which can extremely save the weight of building a drone, perfectly suitable for the 1S weight-sensitive drone such as Meteor65 HD and HX100 SE.
  • F4 1S AIO FC(No Rx) not only integrates with the 25mW VTX but also supports a 1-2S power system, which is perfectly suitable for weight-sensitive drones such as Meteor75 and Beta85 Pro2. 
  • This AIO board also reserves a Plug & Play port for the C01 Camera, C01 Pro Camera, and BETAFPV Nano HD Camera, no soldering work needed, super convenient for installation.
  • Specially added with 2 RGB LED indicators, this board brings the drone an incredible light effect while pilots flying on the night. 
  • This board can handle 5A continuous current(6A burst), supports the 1S lipo battery, brings the drone a stronger flight performance. 
  • Come with a BT2.0 connector, it solves the problem of voltage sag, the discharge can be more efficient, which brings this board a better performance on function for power and responsiveness. 

Specification of F4 1S AIO FC(SPI Rx)

  • Item: F4 1S AIO FC(Frsky/Futaba Rx)
  • Weight: 3.92g(without antenna and BT2.0 connector)
  • VTX Power: 25mW
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • Receiver: Support Frsky Receiver/ Futaba Receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting hole size: 29mm x 29mm / suitable for almost all kinds of whoop frame

Specification of ESC

  • Built-in ESC with 5A continuous and peak 6A current
  • Input voltage: 1S Lipo
  • ESC firmware: O_H_5_REV16_8.HEX 
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM
  • 4 Indicators: Receiver indicator (Blue)/Flight control status indicator (Green)/Flight control power indicator (Red)/VTX indicator (Pink)

Diagram for F4 1S AIO FC(SPI Rx)

SPI Receiver CC2500

Come with the build-in SPI Receiver CC2500, F4 1S AIO FC(SPI Rx) can compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. The default Frksy protocol is Frsky D16, if pilots buy the wrong receiver of the SPI Frsky version or upgrade the wrong firmware accidentally, which need to switch the protocol to Futaba or FrskyD8, please upgrade the Betaflight Firmware according to this tutorial. 

Configuration

Protocol

FRSKY_D

Frsky D8
FRSKY_X

Frsky D16 FCC

FRSKY_X_LBT

Frsky D16 LBT

SFHSS

Futaba S-FHSS

Status LED for F4 1S AIO FC(SPI Rx)

There are 4 LEDs on the bottom of the board to indicate the status, including the Receiver LED ( Blue), FC Status LED(Green), FC Power LED ( Red ), and VTX LED(Pink).

LED

Status

Description

Receiver LED ( Blue)

Solid

Connected or in bind mode

Receiver LED ( Blue )

Flashing

Not connected

Power LED ( Red )

Solid

Power on

Status LED ( Green )

Solid

Motor Armed

Status LED ( Green )

Flashing

Motor Disarmed

Status LED ( Green )

Off

Bind

VTX LED ( Pink )

Flash Slowly

Work

Recommended Parts of F4 1S AIO FC(Frsky/Futaba Rx)

Specification of F4 1S AIO FC(No Rx)

  • Item: F4 1S AIO FC(No Rx)
  • Weight: 3.83g (without antenna and BT2.0 connector)
  • VTX Power: 25mW
  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Firmware version: betaflight_4.2.0_STM32F411
  • Receiver: Support External Receiver, SPI Receiver, including Frsky XM/XM+ receiver, Futaba receiver, Crossfire receiver, and DSMX receiver
  • Motor Pin Connecter: 1.25mm Header Pins
  • Mounting hole size: 29mm x 29mm / suitable for almost all kinds of whoop frame

Specification of ESC

  • Built-in ESC with 5A continuous and peak 6A current
  • Input voltage: 1-2S Lipo
  • ESC firmware: S_H_70_REV16_7.HEX 
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM
  • 4 Indicators: Receiver indicator (Green)/Flight control status indicator (Blue)/Flight control power indicator (Red)/VTX indicator (Pink)

Diagram for F4 1S AIO FC(No Rx)

How to Connect the External Rx to the FC（No Rx）

For more convenience to the pilots, we specially design the Plug & Play SPI Frsky Rx for the F4 1S AIO FC(No Rx), no soldering work needed, super easy to install.  

Receiver Connection Diagram

Status LED for F4 1S AIO FC(No Rx)

There are 4 LEDs on the bottom of the board to indicate the status, including the Receiver LED (Green), FC Status LED(Blue), FC Power LED ( Red ) and VTX LED(Pink).

LED

Status

Description

Receiver LED ( Green)

Solid

Connected or in bind mode

Receiver LED ( Green)

Flashing

Not connected

Power LED ( Red )

Solid

Power on

Status LED ( Blue )

Solid

Motor Armed

Status LED ( Blue )

Flashing

Motor Disarmed

Status LED ( Blue )

Off

Bind

VTX LED ( Pink )

Flash Slowly

Work

Recommended Parts of F4 1S AIO FC(No Rx)

Package

  • 1 * F4 1S AIO Brushless Flight Controller
  • 4 * M1.2x4mm Screws
  • 4 * M1.4x5mm Screws
  • 4 * Anti-vibration Rubber dampers

    Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.

    For merchandise was confirmed as genuinely defective（Product Design problem & Quality issues）, we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.

    In almost all cases, we will work with you to debug your issue firstly. 

    Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.

    NOTE: The refund amount is limited to the purchase price of the item.

    Directly Send Ticket: Create a new ticket

    *We do not accept ALL kinds of returns.

    *All sales are final.

    Affected by Covid-19, there will be some delay in the delivery.

    Shipping Methods and Charges

    We are currently able to ship orders to most international addresses. But some countries are not available to ship batteries without purchasing of whoop drone (logistics company restrictions).
    Two shipping methods are provided for you now. 
    • Standard Shipping
    • Expedited Shipping (including DHL / FedEx / UPS. Can not ship batteries)
    For expedited shipping, you need to pay weight-based rates, which will be calculated automatically.
    For standard shipping, then the shipping fee depends on the value of your orders. If your order is more than 20 USD and less than 99.99 USD, the shipping fee is 5 USD. And the standard shipping fee is 10 USD if your order is less than 20 USD.
    Free standard shipping is offered when your order is over 99.99 USD.

    Note:

    - Some remote address will be charged remote shipping fees according to the quotation of the logistics company.
    - Some special products with big volume are not applied to this free shipping rule. The product collections list as follows:

    For the strict Customs Policy, countries below are not available for delivering batteries. Therefore, if you fail to purchase from our site, hope can you understand that. We'll open selling once there is a reliable logistics channel.
    -India (Both drones and batteries)
    -Kuwait

    Shipping Time: 

    All orders will be processed within 3-5 working days after your payment clearing.
    If we are experiencing a high volume of orders or some products are out of stock, shipments may be delayed in a few days.
    If there will be a significant delay in the shipment of your order, we will contact you via email. Please make sure your email address is available and remember to check the email for the notification.

    Estimated Shipping Time:

    • Expedited Shipping: 3-7 working days
    • Standard Shipping (Registered Mail):  12-30 working days
    Please note:
    * These are estimated delivery times only, BETAFPV can not guarantee an exact delivery time.
    * The estimated delivery time may be longer if any battery included in your order.
    * Affected by Covid-19, there may be some delay in the delivery. 
    * We accept no responsibilities and liabilities for delay in shipping time as this is beyond our control.
    * Any problem about shipping info of your order, please contact Customer Support.

    Battery Shpping Issues

    - We can't ship the battery to the following countries by now: Indonesia / Middle / East / Indonesia/ Philippines/ Vietnam/ India/ Mexico/ UAE/ Brunei/ Finland/ Chile / Brazil / Oman and other remote areas. If your place a order but we don't have a logistic chanel to ship, we will send an email to inform you cancel the order. 
    - For European customers, if your parcel includes only batteries, it will take a longer time for the parcel to arrive in your country. Click here to track your parcel. 
    - If you only order batteries without a drone, then it can't be shipped by expedited Shipping (including DHL / FedEx / UPS) because of the strict restriction of shipping.
    - If the number of batteries in your order exceeds the acceptable range of the logistics, we will ask you to cancel order or ship the batteries separately(extra shipping fee may be requried).

    More Info requried

    If  you are in Taiwan, South Korea or Brazil, there is some extra information that we need in your order because of your country's import policy. Please offer the fllowing information in your address, so we can ship your order in time.
    • Taiwan or Hongkong: please fill your address and name in Chinese.
    • South Korea: please provide your personal clearance code. If you do not have it, please apply it from this website:
      https://unipass.customs.go.kr/csp/index.do
    • Brazil: please provide your tax number (CPF) in your address.
    • Chile: please provide your individual tax number in your address.

    How To Track My Parcel

    We provide trackable shipping service to most of the package. Please click here to reach detail information.

    Wrong Address

    Shipments will be sent to the address entered on our web page during checkout. We cannot be held responsible if the incorrect shipping address is entered by the customer during checkout. We can only modify a wrong address if customer contacts us before the package is marked as shipped.

    We cannot change shipping addresses after the order has been shipped, as the address information you enter is used as part of the fraud checks and fraud prevention. If additional fees are required to re-ship packages due to address errors, those fees may be passed on to the customer.

    Packages that are returned because of an incorrect address provided by the customer will be subject to an additional shipping charge. This shipping charge will apply even if you were not originally charged shipping under a free shipping promotion. 

    Damaged box or incorrect item(s)

    If you receive damaged or incorrect item(s), contact Customer Support in 5 business days with receipt of your shipment to make the necessary corrections. 

    * All duties and taxes are the responsibility of the customer. 

    Customer Reviews

    Based on 4 reviews
    100%
    (4)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    C
    Customer
    Very impressed

    I was hesitant to buy this FC but now I’m glad I did, is very easy to work with, soldering is optional, so I bought 3 more, and have them on different 1S tinywhoop builds with different kv motors and they fly so good.
    I know I will be buying more in the future.

    R
    Ruggero Parrotta

    ottimo prodotto e spedizione veloce

    Y
    Yozshen Dzhemalov

    F4 1S AIO Brushless Flight Controller

    J
    JAVIER COMPTE CATALAN
    Good 👍

    Really good for mounting my first FPV, easy and seamless.