F4 1S 5A AIO Brushless Flight Controller (ELRS 2.4G)
The classical ultralight F4 1S brushless FC comes back with SPI ExpressLRS 2.4G receiver.
Now the default firmware for F4 1S 5A AIO Brushless Flight Controller (ELRS 2.4G) is updated to Betaflight V4.3.0 RC6, which supports ELRS V2.0. Please check the below link to download the firmware.
Download the betaflight_4.3.0_BETAFPVF4SX1280_ELRS2.0.hex
SPECIFICATIONS OF FC
- CPU: STM32F411CEU6 (100MHZ)
- Six-Axis: ICM-20689/MPU-6000
- Built-in Receiver: SPI ExpressLRS 2.4G
- Receiver antenna: 2.4GHz SMD ceramic antenna
- Size: 29mm x 29mm, fully mounting pattern compatible with the whoop frame in the current market
- Firmware version: betaflight_4.3.0_STM32F411_norevision
- OSD: Built-in BetaFlight OSD
- Recommend VTX: >=200mW, like BETAFPV M03 350mW VTX or TBS Unify VTX
- Power Cable: 55mm, with BT2.0 connector
- Weight: 3.13g (no power cable included)
SPECIFICATIONS OF ESC
- Power supply: 1S
- Current: 5A continuous and peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_5_48_REV16_8.HEX
- Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Something you should know to protect the ESC SMD ceramic antenna.
- Recommend using BETAFPV Camera Canopy, which reserves sufficient space between Camera and ESC. Therefore, the SMD ceramic antenna will be protected very well.
- Please make sure there is enough space between the camera and the antenna. If the camera position is too low, it will damage the antenna. So the whole FC should be reversed 180 degrees for installation and all motor positions should be reversed too.
- The antenna shouldn't be exposed. It will be fragile without canopy protection.
Betaflight Firmware and CLI
Since Betaflight has not yet released the official firmware that could support the SPI ExpressLRS protocol, the current version is the Beta version. Please use the firmware and the CLI dump file below to recover the FC board if needed. Betaflight will update its official target soon. Please feel free to contact us if you have any issues with this Beta version Firmware.
It is normal that there is no option on Betaflight Configurator Receiver. As is shown below, the checkbox is blank.
Please change the “PID loop frequency” to “4KHZ” , sometimes it would make the SPI receiver not working correct while the value is “8KHZ”.
The firmware BTFL_4.3.0_BETAFPVF4SX1280_0265565fa uses external GPIO interrupt triggers to process ELRS data reception, increasing the stability of the signal link. Now it can perfectly support LiteRadio 2 SE 500Hz link and modify the accuracy of signal strength.
The new CLI file is named BTFL_cli_F4 5A ELRS_NEW. Please check.
Note: This firmware supports only ELRS 1.0.0, 1.0.1, 1.1.0, 1.2.0, 1.2.1.
Download the firmware and CLI dump file for the F4 1S 5A FC (ELRS 2.4G) board.
How to Bind with Betaflight FC with SPI ExpressLRS Receiver.
More details and discussion on Github about SPI ELRS receiver.
RECOMMENDED PARTS LIST
- Battery: BT2.0 300mAh 1S Battery
- Frame: Meteor65 frame / Meteor75 frame
- Props: 31mm 4-Blades props (for 65mm frame) / 40mm 4-blades props (for 75mm frame)
- Motors: 0603 motors / 0703 motors / 0802 motors
- VTX: M03 25-350mW VTX
DIAGRAM
Larger motor pad for convenience solder directly.
PACKAGE
- 1 * F4 1S brushless flight controller (BT2.0 Connector)
- 4 * M1.2x4mm screws
- 4 * M1.4x5mm screws
- 4 * Anti-vibration rubber dampers
Betafpv.com offers a (30) day manufacture defect warranty, starting from the date the product(s) was delivered to the customer. If more than 30 days have passed since receiving your purchase, unfortunately we can’t offer you a refund or exchange.
For merchandise was confirmed as genuinely defective(Product Design problem & Quality issues), we will ship out a replacement free of charge directly. The consumer will not be charged any fees for approved warranty service.
In almost all cases, we will work with you to debug your issue firstly.
Each claim should have all proof of defect by mean of photo or video showing clearly the defect of the product. Please create a ticket to send us photos or video of your product, a detailed description of your issue, and a description of what you have already done to fix it. We are happy to solve any problem you may meet.
NOTE: The refund amount is limited to the purchase price of the item.
Directly Send Ticket: Create a new ticket
*We do not accept ALL kinds of returns.
*All sales are final.
Affected by Covid-19, there will be some delay in the delivery.
Shipping Methods and Charges
- Standard Shipping
- Expedited Shipping (including DHL / FedEx / UPS. Can not ship batteries)
Note:
- Some remote address will be charged remote shipping fees according to the quotation of the logistics company.- FPV Goggles
- BETAFPV Gates & Flags
- RTF FPV Whoop Kits
- LiteRadio Series radio transmitter
- Radio Transmitter & Drone Storage Cases
For the strict Customs Policy, countries below are not available for delivering batteries. Therefore, if you fail to purchase from our site, hope can you understand that. We'll open selling once there is a reliable logistics channel.
-India (Both drones and batteries)
-Kuwait
Shipping Time:
Estimated Shipping Time:
- Expedited Shipping: 3-7 working days
- Standard Shipping (Registered Mail): 12-30 working days
* These are estimated delivery times only, BETAFPV can not guarantee an exact delivery time.
* The estimated delivery time may be longer if any battery included in your order.
* Affected by Covid-19, there may be some delay in the delivery.
* We accept no responsibilities and liabilities for delay in shipping time as this is beyond our control.
* Any problem about shipping info of your order, please contact Customer Support.
Battery Shpping Issues
More Info requried
- Taiwan or Hongkong: please fill your address and name in Chinese.
- South Korea: please provide your personal clearance code. If you do not have it, please apply it from this website:
https://unipass.customs.go.kr/csp/index.do - Brazil: please provide your tax number (CPF) in your address.
- Chile: please provide your individual tax number in your address.
How To Track My Parcel
We provide trackable shipping service to most of the package. Please click here to reach detail information.
Wrong Address
Shipments will be sent to the address entered on our web page during checkout. We cannot be held responsible if the incorrect shipping address is entered by the customer during checkout. We can only modify a wrong address if customer contacts us before the package is marked as shipped.We cannot change shipping addresses after the order has been shipped, as the address information you enter is used as part of the fraud checks and fraud prevention. If additional fees are required to re-ship packages due to address errors, those fees may be passed on to the customer.
Damaged box or incorrect item(s)
If you receive damaged or incorrect item(s), contact Customer Support in 5 business days with receipt of your shipment to make the necessary corrections.
* All duties and taxes are the responsibility of the customer.
The correct current Sensor amp Meter value in Betaflight is 1175 +/- 5 not 179.
I've been racing with these boards for a few months, and overall I really like them. I was running BF 4.3 RC3, and have started updating them to RC5. Overall they fly well.
My only complaint is that they seem overly susceptible to "drunk gyro", so they sometimes don't fly well after crashing into a gate. I'm hoping that's something that can be addressed in firmware vs hardware - if so I'd give it 5 stars for sure!
I build a 75mm Whoop with 0702 Motors and a super silent 35g 3" with 1103/8000 Motors. Really cool!
great specs, flys smooth... it survived a water crash as well
Long range, very light, best 1 s FC on the market.